Menu
Your Cart

DiRK Battery Tattoo Pen #HM075

DiRK Battery Tattoo Pen #HM075
DiRK Battery Tattoo Pen #HM075
DiRK Battery Tattoo Pen #HM075
DiRK Battery Tattoo Pen #HM075
DiRK Battery Tattoo Pen #HM075
DiRK Battery Tattoo Pen #HM075
DiRK Battery Tattoo Pen #HM075
$189.00
  • Stock: In Stock
  • Model: HM075
  • Weight: 1.00kg

DiRK 

Wireless Tattoo Machine

  

 

 

 

Parameters:                             

Shell Material: Aluminum              

Battery Cell Type: Li-Polymer  

Battery Model:102540-2P-2400mAh    

Rating Voltage: 3.7v

Input Port: USB-C                    

Adapter: 5V 1A/5V 2AHigher Adapter Will Damage Batteries                   

Working Speed Adjustment: 5-12v(0.1v/step)

Manufacturing process:CNC machining and engraving

Motor:Customized coreless motor

 

Instructions:                            

Power on: 

Long press(2 seconds) the power button to On/Off.

Adjust the Output Voltage: 

Starting voltage: 8v

Minimum~Maximum output voltage: 5v~12v

Press + and “-” keys to adjust the output voltage(0.1v per step), short press the power button to pause/continueLong press “+/- to increase or decrease quickly

Working Display Screen :

Power Capacity

Current Voltage

 

Machine Operating Guide

Voltage

Working Hours

Speed

Tattooing Work

5v

7h

90Hz

Foggy Dot  / Solid Dot

6v

6.5h

108Hz

Foggy Dot  / Solid Dot   / Shader

7v

6h

126Hz

Foggy Dot  / Solid Dot  / Shader  /Liner

8v

5.5h

144Hz

Solid Color  / Shader  / Liner

9v

5h

162Hz

Solid Color  / Shader  / Liner

10v

4.5h

180Hz

Solid Color  /  Liner

11v

4h

198Hz

Liner

12v

3.5h

216Hz

Liner

 

 

 

Battery                                   

Charge completion time:

5v 1A:  Approx 3.5~4 hours

5v 2A:  Approx 1.5~2 hours

Extra 0.5h more for full charging will make it best performance.

Available Working Time: Full power working hours

Low voltage: 5~7 hours

High voltage: 3.5~5.5 hours

Operating Temperature:(Charging)0~45°C;(Discharging)-10~40°C.

 

Maintenance:                           

 

Clean the machine. At the end of each tattoo work, please turn off the machine completely and clean the outside of the machine. Firm stains can be wiped with alcohol. Do not let liquid enter the machine.

 

Regular maintenance of the machine, every 50 hours of use, the machine needs to be maintained.

Apply lubricating oil --- 1. At the internal thread groove of the handle 2 at the two balls at the lower end of the motor compartment cover 3. At the rubber ring. (Professional paste lubricant is recommended) Please ensure that there is a gap between the handle and the motor compartment cover Enough lubrication to prevent the motor compartment cover from falling off the motor fixing seat with the adjustment (rotation) of the handle.

 

Clean the battery electrodes and contact posts. Wipe the two power supply contact rings and contact posts with a soft cloth dipped in alcohol to remove the oxide layer and avoid poor contact.

Attention Please:                        

DON’T use a charger adapter higher than 5V 2ASuggest 5V 1A to charge the battery (charging with excessive voltage and current will completely damage the battery).

Write a review

Note: HTML is not translated!
Bad Good